Backup Cameras

• How do I pair my backup camera to the monitor?

  Make sure you have charged your camera for at least 4 hours using the USB charging port before attempting to pair the unit. Once that is complete you can follow the steps below: First, unplug the solar panels from the camera Make sure the camera and monitor are near each other Apply power to the...

• How do I turn the backup assist lines on/off?

  With an image on the display, press and hold the MFU button on the far-left side (it looks like a person falling/pointing down) for 3 seconds then release. This will turn the backup assist lines on or off.

• Is there a way to make my display stay on for more than 30 seconds?

  Currently there is not an option for more than 30 seconds at a time. To turn the display back on, touch the MFU button on the far-left side of the bottom of the display, looks like a person falling/ arrow pointing down. This will bring back the display for another 30 seconds.

• My display went blank how do I get the picture back?

  Touch the MFU button on the far-left side of the bottom of the display, looks like a person falling/ arrow pointing down. This will bring back the display for another 30 seconds.

• There is nothing showing on my monitor. What do I do?

  If nothing is showing on the monitor, the monitor and the unit are likely not paired or not paired correctly. To pair the unit, follow these steps: Charge the camera before use Connect the supplied USB cord to the micro USB port of the camera assembly. Plug the USB cable into any standard USB ...